Features

- Meets ICC-ES AC212 water-resistive barrier testsMeets requirements of ICC-ES AC 148

- Meets ASTM D 1970 Nail Sealability Requirements

- Approved for Senergy Wall Systems

- Liquid-applied, continuously-bonded membrane; eliminates seams, lap joints andstaples

- One component, water-based, very low VOC contentNonflammable as applied

- Compatible with lightweight, low-cost spray equipment- No primer required

‍

‍BENEFITS

- One fully qualified air/water-resistive barrier material for the entire building

- Can be used as a flexible flashing in rough openings or through-wall penetrations

- Self-sealing

- Full system warranty with Senergy EIFS and stucco wall claddings

- Transfers wind loads directly to the substrate

- Safe for workers and the environment, low odor, easy application

- Promotes workplace safety

- Fast, easy economical application

- Single pass application on most substrates

‍

‍USES

‍Senershield-R is used as a vapor permeable air/water-resistive barrier over the following exterior wall substrates:

• ASTM C1177 type sheathings, including DensGlass™ exterior sheathing, e²XP™ sheathing, GlasRoc®sheathing, Securock™ glass-mat sheathing, Weather Defense™ Platinum sheathing, GreenGlass®sheathing

• PermaBase™ brand cement board by National Gypsum (or other ASTM C1325 Type A Exterior approved cement boards)• Untreated Exposure I or exterior plywood sheathing (grade C-D or better)

• Untreated Exposure I OSB

• Gypsum sheathing (ASTM C79/ASTM C1396)

• Poured concrete/unit masonrySenershield-R should not be used for below grade applications or on surfaces subject to water immersion.Senershield-R complies with the air barrier impermeability requirements of the Massachusetts Energy Code.